Lidsjövägen 1
3335 32 Gnosjö
Tel 0370-332360
Fax 0370-332369
www.gnosjomaskin.se
info@gnosjomaskin.se
Lathe CD6241V with variable spindle speed
Without VAT:
141344
In Stock
Article Code CD6241V-D2
Print| Maker | Weight | ~1160 kg | |
| Model | CD6241V/D2 | Size | 1,97 x 1 x 1,53 m |
| Ser. No | Condition | 10/10 | |
| Year | Delivery Code |
Tool accessories
Machine are delivered as standard with 3-axis digital chuck guard appron guard 3-jaw chuck 200 mm faceplate 350 mm 4-jaw plate 250 mm follow- and steady rest tool post 5 pcs toolholders coolant kit lamp thread clock revolver stop manuals (ENG/SE) etc.Specification
Machine has frequency-controlled spindle speed, which enables cutting with constant cutting speed. If constant cutting speed is not desired, set the speed control to manual mode. Heavy stand, hardened prism, norton gearbox etc.
Center height: 205 mm
Center distance: 1000 mm
Swing over bed: 410 mm
Swing over cross slide: 255 mm
Swing in gap Ø: 580 mm
Gap width: 190 mm
Width of bed: 250 mm
Total cross slide travel: 210 mm
Total top slide travel: 140 mm
Spindle bore: 52 mm
Spindle nose: D1-6
Morse taper in spindle: MT6
Spindle speed (freq. control): 30-550/550-3000 rpm
Lead screw dia. & pitch: 28x6 mm
Thread pitches INCH: 45 pcs (2-72 TPI)
Thread pitches MM: 39 pcs (0,2-14 t/mm)
Longitudinal feeds: 17 pcs (0,05-1,7 mm/v)
Cross feeds: 17 pcs (0,025-0,85 mm/v)
Tailstock quill travel: 120 mm
Tailstock quill diameter: 50 mm
Morse taper in tailstock: MT4
Spindle motor: 5,5 kW
Size WxDxH: 1,97x1x1,53 (1,95) m *
Transport size LxDxH: 2,05x1,06x1,75 m
Transport weight: ~1330 kg
*: Specified height is without machine feet. The measurement shown inside the parentheses is with the machine cover folded up.
Denna info är upprättad efter bästa förmåga - men är inte bindande i detalj. Samtliga priser är exklusive moms med reservation för pris-/valutaförändringar.
